E n
DVD Menu Options
Setting the digital output |
| Setting the PCM output |
g l i s h
Set Digital Output according to the optional audio equipment you connected.
Follow the steps of “Using the Setup Menu” and select :
> Digital Output
Digital Output | Off | |
Night mode | All | |
PCM only | ||
Analog Output | ||
|
Speakers
Speaker Layout
PCM Output
Set Digital Output
Off
Select this to deactivate the digital output.
All
Select this if you have connected the digital output to an optional piece of audio equipment that has a multichannel decoder.
PCM only
Select this if the optional audio equipment is not capable of decoding multichannel audio. After that, proceed to “Setting the PCM output.” Once you select “PCM only” the surround mode will automatically change to “STEREO”.
Set your PCM (Pulse Code Modulation) output only after you have set the system’s Digital Output to ‘PCM only.’ (See “Setting the digital output”.)
Follow the steps of “Using the Setup Menu” and select :
> PCM Output
Digital Output |
|
Night mode |
|
Analog Output |
|
Speakers |
|
Speaker Layout | 48 kHz |
PCM Output | 96 kHz |
Set PCM output to 48K or 96K
48 kHz
Select this if the optional audio equipment is incapable of processing
96 kHz digital signal input. The signal will then be converted to a standard signal with sampling rates of 48 kHz.
96 kHz
Select this if the optional audio equipment is capable of processing digital signal input with sampling rates of 96 kHz. However, if the sound output is distorted or there is no sound, select ‘48 kHz’ instead.
30
