Wired connection with automatic IP address
This is how to navigate and select with the remote control:
• Press 
or 
to select a menu option.
• Press OK to confirm a selection.
• Press BACK 
to go back to the previous screen.
• Press HOME to go to the Home menu.
The alphanumeric buttons of the remote control are
• To select a number or an alphanumeric character, press a button once or repeatedly until you see the number or alphabetic character in the display of NP2900.
• To cycle through the alphanumeric characters that are available, press a button repeatedly.
• To delete the last character entry from the display, press CLEAR.
• To delete the whole last line entry from the display, press and hold
CLEAR.
The onscreen display guides you through the process of connecting NP2900 to your home network and the Internet. This section describes the typical wired setup with automatic IP address. You can also follow the onscreen prompts for advanced configurations that are not described in this manual.
1 Connect an Ethernet cable (sold separately) to the ETHERNET jack of NP2900 and the Ethernet jack of the wired router.
2 Ensure that the wired router is turned on and has broadband Internet access.
3 Turn on NP2900.
4 Press SETTINGS, to go to the Settings menu.
5 Select [Wired (Ethernet)] to start the network setup process.
»» NP2900 acquires the automatic IP address.
»» NP2900 shows the confirmation for the connection to the network.
»» NP2900 shows the prompt for the connection to the Internet.
6 Select [Yes] to connect to the Internet. »» NP2900 shows the confirmation for
the connection to the Internet.
Wired connection with static IP address
This is how to navigate and select with the remote control:
•Press 
or 
to select a menu option.
•Press OK to confirm a selection.
•Press BACK 
to go back to the previous screen.
•Press HOME to go to the Home menu.
The alphanumeric buttons of the remote control are
•To select a number or an alphanumeric character, press a button once or repeatedly until you see the number or alphabetic character in the display of
NP2900.
•To cycle through the alphanumeric characters that are available, press a button repeatedly.
•To delete the last character entry from the display, press CLEAR.
•To delete the whole last line entry from the display, press and hold
CLEAR.
The onscreen display guides you through the process of connecting
NP2900 to your home network and the Internet. This section describes the typical wired setup with static
IP address. You can also follow the
English
EN 29
