Troubleshooting
Considerable noise in radio broadcasts.
The remote control does not function.
The display is dark.
Low hum or buzz sound.
Low bass response.
Unable to select Progressive Scan
Some files on the USB device are not displayed.
“DEVICE NOT SUPPORTED” scrolls on the
display.
✔Tune in to the correct frequency.
✔Connect the antennas.
✔Fully extend the FM wire antenna. Position for best reception and secure to a wall.
✔Connect an outdoor FM or MW antenna.
✔Adjust the direction and position for best reception.
✔Place the antenna farther away from any equipment that may be causing the noise.
✔Increase the distance between the system and your TV or other equipment.
✔Select the correct source (DISC or TUNER, for example) before pressing the function button.
✔Point the remote control at the remote sensor of the unit.
✔Reduce the distance to the player.
✔Remove any possible obstacles.
✔Replace the batteries with new ones.
✔Check that the batteries are loaded correctly.
✔Press DIM again.
✔Place the DVD micro system as far away as possible from electrical devices that may be causing interference.
✔Check all speakers for correct polarity.
✔Check that the output of the video signal is switched to 'Pr/Cr Pb/Cb Y'.
✔Check if the number of folders exceeds 99 or the number of titles exceeds 999.
✔Remove the USB mass storage device or select another source.
English
41
