Philips PET1046/12 user manual Powering your remote control

Models: PET1046 PET1046/12

1 46
Download 46 pages 24.02 Kb
Page 16
Image 16

The RED LED will turn off when the set is fully charged.Whe n the low battery icon appears on the screen, please charge the player. * Rechargeable batteries have a limited number of charge cycles and may eventually need to be replaced. Battery life and number of charge cycles vary by use and settings.

4.2 Powering your remote control

1Open the battery compartment. Remove the pro- tective plastic tab (first time use only).

2Insert 1 x lithium 3V battery, type CR2025, then

close the compartment.

CAUTION

Batteries contain chemical substances, so they should be disposed of properly.

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

Incorrect use of batteries can cause electrolyte leakage and will corrode the compartment or cause the batteries to burst.

Perchlorate Material – special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.

Page 16
Image 16
Philips PET1046/12 user manual Powering your remote control