Symptom

Remedy

Completely distorted

The NTSC/PAL setting may be in the

picture / no colour in

wrong status. Match your TV’s setting with

the TV screen

the player’s setting.

No sound

Check audio connections. If using a HiFi

 

amplifier, try another sound source.

Disc can’t be played

Ensure the disc label is upwards.

 

Clean the disc.

 

Check if the disc is defective by trying

 

 

another disc.

The player does not

Aim the remote control directly at the

respond to the remote

sensor on the front of the player. Avoid all

control

obstacles that may interfere with the signal

 

path. Inspect or replace the batteries.

Distorted or B/W pic-

Use only discs formatted according to the

ture with DVD

TV-set used (PAL/NTSC).

Loss of current TV

1 Press SETUP > TV & RADIO >

programs when travel-

 

Country.

ling to another country

2

Select your country.

 

3

Select Auto search.

No audio at digital

Check the digital connections.

output

 

 

Player does not respond

Operations are not permitted by the disc.

to all operating com-

Refer to the instructions in the disc

mands during playback

 

inlay.

Cannot detect USB

Unplug the USB connection and plug-in

plug-in

 

again. Detection may take some time that

 

 

vary with the capacity of your USB device.

 

The DVD player only support Mass

 

 

Storage (MSC) format from USB flash

 

 

drive.

 

The DVD player does not support Hard

 

 

Disk storage or Media Transfer Protocol

 

 

(MTP) format.

 

 

 

Page 41
Image 41
Philips PET1046/12 user manual Press Setup TV & Radio, Country, Select Auto search