PREPARATIONS

 

Power supply

 

Using the AC / DC adaptor

 

Turn off the player before connecting the sup-

 

plied adapter to it and the main power supply

 

(as shown). The player must be turned off when

;

the battery charges.

 

TIP

To avoid damage to the player, switch off before plugging or unplugging the AC adaptor.

Using the car adapter

Connect the supplied car adapter to the set and the car cigarette lighter outlet.

TIP

To avoid damage to the player, switch off before plugging or unplugging the car adaptor.

When connecting with car power (cigarette lighter) adaptor, be sure the input voltage of the adaptor is identical with car voltage.

Make sure the temperature is below 35oC when the DVD player is connected to DC 16.0V in a car.

Powering your remote control

1 Open the battery compartment. Remove the protective plastic tab (first time users only).

2Insert 1 x lithium 3V battery, type CR2025, then close the compartment.

CAUTION

-Batteries contain chemical substances, so they should be disposed of properly.

-Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

-Incorrect use of batteries can cause electrolyte leakage

and will corrode the compartment or cause the batteries to burst.

PREPARATIONS

English

Remove the battery if the remote control is not to be used for a long time.

Connections

 

Connecting headphones

 

Connect the headphones into the

 

;

 

p jack of your set.

 

Connecting additional equipment

Turn off your set before connecting to any additional equipment.

You can connect the player to a TV or an amplifier to enjoy DVDs or karaoke.

AV OUT

Connect the desired device to this terminal directly (no setting needed in the DVD mode).

TV

White

Red

Not supplied

AUDIO IN

Yellow

VIDEO IN

9

Page 9
Image 9
Philips PET716 user manual Preparations