Philips Portable DVD Player PET816
Quick start guide
1 Charge your battery | 2 Enjoy (Disc operation) |
2Enjoy (AV OUT)
Connecting additional equipment (TV for example)
1 Connect the AV OUT socket on the set to the |
video and audio sockets on a TV as shown |
directly. |
This portable DVD player is designed with a
1Slide the POWER switch to the OFF position (charging of the DVD player only possible in the
2Connect the supplied power adaptor cord (or the car adaptor) to the player and AC mains (or the car cigarette lighter outlet) to start charging.
➜The CHG indicator turns red .
➜When the battery is fully charged, the indicator turns off.
3Disconnect the power adaptor cord (or the car adaptor) when the CHG indicator turns off.
Notes:
–You can also connect the supplied power adaptor cord (or the car adaptor) to the player and AC mains (or the car cigarette lighter outlet) directly wherever possible.
1Open the lid of the player.
2Slide the POWER switch to ON to switch on the DVD player.
➜ The POWER indicator turns on.
3Press OPEN to open the disc door.
4Remove the protective card (if any) and load a disc with the label side facing up.
5Close the disc door. Playback will start automatically. If not, press 2;.
6To stop playback, press 9.
Note:
–Once the battery is fully discharged, immediately recharge it (regardless of whether you plan to use the battery or not) in order to maximize the battery life.When the power is low, the battery icon will be shown on the
2 Switch on the TV and set to the correct |
➜ You can consult the owner's manual of |
your TV. (If your TV does not have Audio and |
Video inputs, you will need to purchase a RF |
modulator. Please consult your dealer.) |
TV
White |
|
Red | Not supplied |
Yellow |
|
Printed in China | WK739 |
3OPEN HERE
