EN 18
To ensure unobstructed reception on
the 3D glasses, do not block the 3D
transmitter on the TV.
Select a source with 3D
For 3D discs:
1. Play the disc on a 3D Blu-ray disc player
that is connected to the TV HDMI
connector.
2. Press , then select the 3D Blu-ray disc
player.
For 3D TV programmes:
Select [Watch TV] and switch to a TV
channel that broadcasts 3D content.
Switch on 3D
The first time that the TV detects a
broadcast 3D signal, an onscreen message
will prompt you to choose your preference.
If you want the TV to switch to 3D
automatically, select [Automatic].
If you want to be notified first, select
[Notify].
If you don't want to be notified, select
[No 3D].
Start 3D
The TV detects when 3D is available and
prompts you to put on your 3D glasses. Put
on the glasses and switch them on. If the TV
cannot detect the 3D signal due to a missing
3D signal tag, it displays images that overlap.
To switch the overlapping images to 3D,
change the 3D format.
1. Press ADJUST.
2. Select [3D].
If the TV displays pictures that overlap
vertically, select [3D - Side by side].
If the TV displays pictures that overlap
horizontally, select [3D - Top /
bottom].
Note: If available, select the inverted format
if the normal format results in strange 3D
effects.
2D to 3D conversion
You can convert any 2D programme to
watch it in 3D.
1. Press ADJUST.
2. Select [3D] > [2D to 3D conversion].
To stop the 2D to 3D conversion:
1. Press ADJUST.
2. Select [3D depth on/off] > [Off], then
press OK.
You can also switch to another activity from
the Home menu to stop the 2D to 3D
conversion. If you switch to another channel,
the conversion does not stop.
Switch off 3D If you switch to another connected device or
a new activity, the TV switches back to 2D.
You can switch off 3D while watching a 3D
programme.
1. Press ADJUST.
2. Select [3D depth on/off] > [Off], then
press OK.
The programme is displayed in 2D, showing
only the left side of the 3D picture.
If there is no 3D signal, the 3D glasses switch
off automatically after 5 seconds.