Advanced Button Functions

DVD Functions

SCAN+ and SCAN- buttons control the speed of Fast Forward and Reverse Playback respectively. CHAPTER+ andCHAPTER- buttons respectively locate the succeeding or preceding Chapters or Tracks on a disc.

SUBTITLE button turns the subtitles on or off. REPEAT button performs DVD players “A-B Repeat” (or RPT A.B) function for repeat play of current Chapter or Track.

INFO/SELECT button brings up DVD Display or Control Menu for Chapter/Track/Title number, Time remaining/elapsed indication, system information, etc. QUIT button is used to Exit or Clear on-screen Menu displays.

PLAY button is used to start Disc playback and for Menu selection on some DVD players.

STOP button stops Disc playback.

PAUSE button pauses Disc playback - press PLAY to resume.

INPUTbutton activates the DVD Player’s SETUP Menu.

MENUIN/OUT

The Menu In/Out button allows you to toggle in and out of Menu Mode. Pressing Menu In/Out brings up your device Menu. While in Menu mode the remote’s red indicator light blinks continuously. The remote will exit Menu Mode after 20 seconds if no keys are pressed. While Menu Mode is active, the Menu, Channel, Volume, Mute and Mode keys perform the following functions:

MENU IN/OUT Exits/Enters Menu mode. CHANNEL UP/DOWN Up/Down commands for on- screen Menu navigation.

VOLUME UP/DOWN Right/Left commands for on- screen Menu navigation.

MUTE OKcommand for on-screen Menu selection. TV Mode Key Quit, Exit or Clear command to quit on- screen Menu and return the remote to normal operation (red indicator is now off). Note this action is also available by pressing any Mode key.

8

Advanced Functions, cont.

VCR/DVD Punch-Through Feature

This remote lets you Punch-through to the last VCR or DVD device used. Normally other types of remotes only punch-through (from another Mode) on the 6 VCR buttons, to the device programmed under the VCR Mode button. This is not much use if you are using a DVD programmed under a Mode other than VCR. This remote punches-through to the last VCR or DVD device you used. For example, if you have 3 DVD/VCR devices programmed into this remote, the last one you accessed on the remote will be the one that has control of the 6 VCR/DVD buttons when in any other mode.

TV/VCR/INPUT

When in TV mode the TV/VCR/INPUT button performs the INPUT source switch function.

When in a mode that has been programmed for VCR the TV/VCR/INPUT button performs the TV/VCR antenna switch function.

When in a mode that has been programmed for Cable the TV/VCR/INPUT button performs the A.B switch function.

When in a mode that has been programmed for SAT the TV/VCR/INPUT button performs the TV/SAT switch function.

When in a mode that has been programmed for DVD the TV/VCR/INPUT button performs the DVD Setup function.

TV/VCR and TV/DVD Combo units

Note that for some TV/VCR and TV/DVD combo units you might need to set up two different buttons to control both parts of the combo unit. E.G., (referring to the Direct Code Entry section on the following page) you might need to set up a code under the TV button to control the TV part of the combo unit AND a separate code for the VCR or DVD under any other button you choose.

Misc.

OK means same as SELECT - some manufacturers use OK label and others use SELECT label on their remotes.

CCwill activate the Closed Caption feature if your device has that feature.

9