Code Entry
Direct Code Entry
1.Press and hold the CODE SEARCH button until the red indicator stays on, then release the CODE SEARCH button.
2.Press and release the desired mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
3.Enter the 3 digit code from the code tables (on separate sheet). Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
4.With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your equipment, try one of the other codes for your brand.
|
|
|
|
|
|
|
| POWER |
|
|
|
| VCR |
|
| ||
| TV |
|
| DVD |
| CBL | ||
2. |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| |
| QUIT |
| TE | R/ |
|
|
| |
|
|
| C |
|
| |||
|
| P |
| H |
|
| ||
|
|
| A |
| ||||
|
| CHA |
|
|
|
| N |
|
|
|
|
| OK |
|
| VOL | |
| VOL |
|
|
|
|
|
| |
| INFO |
|
|
|
|
|
| MENU |
| SELECT | C |
|
|
|
| N | IN/OUT |
|
| H |
|
|
|
|
| |
|
| A |
|
|
|
| A |
|
|
| P |
|
| H |
| ||
|
|
|
| TER/C |
|
| ||
|
| CODE |
| SUB | PREV. | |||
1. | SLEEP SEARCH |
| TITLE | CHAN | ||||
|
|
|
|
|
|
|
| |
REPEAT
3.
Code Entry, cont.
Programming with Code Search
If your product does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching for your code by following these steps.
1.Manually turn on the device (TV, VCR, etc.) to be controlled.
2.Press and hold the CODE SEARCH button until the red indicator stays on, then release the CODE SEARCH button.
3.Press and quickly release the desired mode button (TV, VCR, etc.). The red indicator blinks off once.
4.Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks off with each button press. If you accidentally overshoot the code required, press the CHANNEL DOWN button to backtrack through the library until the device changes channel. Pressing CHANNEL UP changes direction to forward again.
5.Press and release MUTE to install the code.
Most users will store VCR codes under the VCR button, Satellite codes under SAT , etc. If (for example) you want to store a VCR code under SAT, first follow the procedure for Direct Code Entry (page 10) and press SAT in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search (or Brand Search, page 12).
Note: If the device does not have a CHANNEL UP button, use PLAY (VCR only) or POWER instead. Code Search starts from the currently stored three digit number under that mode.
Write your codes down here for easy reference later.
Type | Type stored | Code |
|
|
|
TV | TV |
|
|
|
|
VCR |
|
|
|
|
|
DVD |
|
|
TV
3.
QUIT
VOL
INFO
SELECT
| VCR |
|
|
|
| DVD |
| CBL | |
|
|
|
| |
| R |
|
|
|
TE /C |
|
| ||
P |
| H |
|
|
HA |
| AN |
| |
C |
|
|
|
|
| OK |
|
| VOL |
|
|
|
| |
|
|
|
| MENU |
C |
|
|
| IN/OUT |
H |
|
| AN |
|
A |
| H |
| |
P |
|
| ||
| TER/C |
|
| |
4.
5.
Cable |
10 |
CODE SUB PREV.
SLEEP SEARCH TITLE CHAN
2.
REPEAT
11