Philips PPX1230 Appendix, Technical Data, Accessories, Power supply, Built-inrechargeable battery

8 Appendix

Technical Data

Dimensions (L¦×¦H¦×¦W)	100¦×¦32¦×¦100¦mm
Weight	0,28¦kg
Recommended Ambient	5¦–¦40¦ºC
Relative Humidity	20¦–¦80¦% (non-condensing)
Video Standard (CVBS)	PAL, SECAM, NTSC
Video Standard (YPbPr)	480i/p, 576i/p, 720p, 1080i
Headphone connection	Stereo - jack plug: 3,5¦mm
Audio Output	2¦x¦0,3¦W

Technology / Optical

Display technology		0,37" LCoS
Light source		RGB LED
Resolution	800¦x¦600¦pixel
Supported Resolutions	VGA/SVGA/XGA
Brightness (Bright Mode)	up to 30¦lumen
Contrast ratio		400:1
Projected image size		5,2¦–¦81¦inch
Screen distance	0,2¦m up to 3¦m
Horizontal Scan Rate		31¦–¦69¦kHz
Vertical Scan Rate		56¦–¦85¦Hz
Power supply
Manufacturer	Wanlida Group Co., Ltd.
Model No		MPA-630
Input	100¦–¦240¦V¦~ / 50¦/¦60¦Hz
Output		12¦V¦† / 2¦A
Built-in rechargeable battery
Battery type		LiPol
Charging time		3¦h
Operating time		2,5¦h
Operating time (Power Save switched on)		................. 3¦h

Accessories

Following accessories are available for your device:

YUV /YPbPr Adaptercable	PPA 1110 / 253372492
VGA-Audiocable	PPA 1150 / 253372489
iPod / iPhone Cable	PPA 1160 / 253372471

All data are provided for reference purposes only. Sagemcom reserves the right to make any changes without prior notice.

The CE marking certifies that the product meets the main requirements of the European Parliament and Council directive 1999/5/CE on telecommunications terminal equipment, regarding safety and health of users and regarding electromagnetic interference.

The declaration of compliance can be consulted on the site www.sagem-ca.at/doc

Preservation of the environment as part of a sustainable development logic is an essential concern of Sagemcom. The desire of Sagemcom is to operate systems observ-

ing the environment. The desire of Sagemcom is to operate systems observing the environment and conse- quently it has decided to integrate environmental per- formances in the life cycle of this products, from manu- facturing to commissioning use and elimination.

Packaging: The presence of the logo (green dot) means that a contribution is paid to an approved national organisation to improve package recovery and recycling infrastructures to facilitate. Please respect the sorting rules set up locally for this kind of waste.

Batteries:If your product contains batteries, they must be disposed of at appropriate collection points.

Product: The crossed-out waste bin stuck on the product means that the product belongs to the family of electrical and electronic equipment. In this respect, the European regulations ask you to dispose of it selectively;

•At sales points in the event of the purchase of similar equipment.

•At the collection points made available to you locally(drop-off centre, selective collection, etc.).

In this way you can participate in the re-use and upgrad- ing of Electrical and Electronic Equipment Waste, which can have an effect on the environment and human health.

The paper and cardboard packaging used can be dis- posed of as recyclable paper. Have the plastic wrapping and Styrofoam packaging recycled or dispose of it in the non-recyclable waste, depending on the requirements in your country.

Trademarks: The references mentioned in this man- ual are trademarks of the respective companies. The lack of the trademarks É and Ë does not justify the assumption that these dedicated terminologies are free trademarks. Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Sagemcom disclaims any and all rights in those marks.

Neither Sagemcom nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or failure to strictly comply with Sagemcom operating and maintenance instruc- tions.

EN

Appendix 13