y;ur television comes with an nscreen clock. During normal
operation the clock appears on the
screen when the STATUS/EXIT but-
ton is pressed or when channel
changes occur
<_ Press the CLOCK button on the remote to display the onscreen
| CLOCK menu. |
_ | Press the CURSOR UP • OR |
| CURSOR DOWN • buttons until |
| the words SET CLOCK are high- |
| ghted. |
<_;_ Enter the current time using
the NUMBERED buttons. If the first number is a single digit first
enter a zero then the dig!t (i.e.,
press 0 , then press "8 ).
<_ Press the CURSOR RIGHT • or CURSOR LEFT ,_ buttons to set either AM or PM time.
Note: The CLOCK onscreen menu can also be accessed through the main menu by pressing the MENU
button; then scrolling up/down with the CURSOR UP • or
CURSOR DOWN • buttons until
the word CLOCK is highlighted. Press the CURSOR RIGHT • button to activate the CLOCK menu and follow the steps above to set the time.
Remember: Be sure to [[ press "0" first and then the
hour number for single digit entries.
To clear the onscreen menu press
the STATUS/EXIT button or wait a
few seconds after you have fin-
ished your adjustment and the
menu will automatically disappear from the screen.
JcK --:-- AMI
T1MERACTIVE ON
CHANNEL12
[SETCLOCK 10:00 AMI
TIMERACqqk_ ON
CHANNEL12
lafpTat_mnesicSSee_time,.the will not
Note: The CLOCK onscreen menu can also be accessed through the main menu
by pressing the MENU button; then
scrolling up/down with the CURSOR UP • or CURSOR DOWN • buttons
until the word CLOCK is highlighted.
Press the CURSOR RIGHT • button to activate the CLOCK menu and follow
the steps above to set the time.
17
