Philips PS1946C1 Hooking UP Your TV Basic Antenna TV Connections, If your antenna has a round

HOOKING UP YOUR TV (BASIC ANTENNA TV CONNECTIONS)

ANTENNA		SMART
combination antenna receives		HELP
Anormal broadcast channels		Remember:
(VHF 2-13 and UHF 14-69).	Note: For homes with separate UHF and VHF antennas	Be sure to set the
Your connection is easy since		TV for the type sig-
	you will need an optional combiner to connect to the TV.
there is only one 75Ω (ohm)		nal you've connect-
antenna plug on the back of your	U/V	ed (see the “Tuner”
		section on page 11
TV - and that’s where the antenna	Combiner
		of this manual.)
goes.
BEGIN		To set the TV to
If your antenna has a round		select only the chan-
		nel numbers in your
cable (75 ohm) on the end, then
	Back of TV	area see how to
you're ready to connect it to the TV.
		“Program" or "Add"
If your antenna has flat twin-lead
		channels in the TV’s
wire (300 ohm), you first need to
	75-300 Ohm Adapter	memory on page 12
attach the antenna wires to the screws
		(Auto Program sec-
on a 300 to 75 ohm adapter.
		tion).
Push the round end of the		To order any option-
adapter (or antenna) onto the 75Ω		al accessory contact
plug on the rear of the TV. If the		your dealer or the
round end of the antenna wire is		Philips Parts Center
threaded, screw it down tight.		at 1-800-851-8885.

75 V

Combination VHF/UHF			2
Antenna
(Outdoor or Indoor)	1	300 to 75Ω
		Adapter
	Twin Lead
	Wire	OR	Back of TV
	Round Cable		75 V
	75Ω

6