RemoteControls_MCP9350i_English.qxd 20-10-2005 16:47 Pagina 11
EN
5Press any key to confirm the new setup.
>When setup was successful AMP, in the selector window, switches off, then blinks twice briefly. The remote control returns to normal operation mode. You can now use the AMP volume controls in SAT mode.
>When setup was not successful AMP, in the selector window, switches off and then
blinks for at least 1 second. Start again from step 1.
•To restore the original setup, you have to revert the remote control back to the factory default settings. For this see ‘Restoring all original functions’.
Restoring all original functions (Facory reset)
1Press digit keys 1 and 6 (12) simultaneously for 3 seconds.
>After 3 seconds one of the device indicators in the selector window (PC, TV, AMP, SAT or DVD) blinks twice and then remains lit .
2Press digit keys 9, 8, 1 (12).
>The device indicator blinks once after every key press. After the last key press, the device indicator blinks twice and then remains lit.
>When factory reset was successful the device indicator blinks twice, then remains lit. The indicator then blinks twice again and the remote control returns to normal operation mode. All user settings are set back to the factory default settings.
>When factory reset was not successful the indicator switches off and then blinks for at least 1 second. Start again from step 1.
11
