Use of the remote control
VGA
press repeatedly to select your computer connected to the VGA 1 or 2 connector.
POWER
AV1, AV2, AV3
press to select the peripherals connected to the connector indicated on the monitor.
BRIGHTNESS +/-
to adjust the brightness level of the picture
CONTRAST +/-
to adjust the contrast level of the picture
ZOOM ON/OFF
to activate/de-activate the zoom function. See p. 5.
|
|
| B |
VGA | AV1 | AV2 | AV3 |
BRIGHTNESS | CONTRAST | ||
ZOOM ON/OFF | ZOOM IN |
| ZOOM OUT |
MENU |
|
| OK |
MUTE
V 
¬ 
CH/PR
ZOOM IN/OUT
to adjust the zoom factor and to change the magnification of the picture when zoom is activated. See p. 5.
1 2 3
4 5 6
7 8 9
AV MUTE
0 q
MENU to switch the menu on/off
cursor buttons to select your choice and to alter a selected adjustment.
OK to activate your choice
Vno function (except when in combination with an electronic receiver box.
¬no function (except when in combination with an electronic receiver box.
CH/PR Program selection
To browse through the sources selected.
AV MUTE to mute the picture or restore it (if the monitor is used in monitor mode).
When activated a green indicator starts blinking in front of the monitor.
qPicture format
See Picture 2 menu, p. 5.
Press the q key to switch between the different picture formats.
