Philips RS232 manual Use of the remote control, ¬ Mute key

Use of the remote control

VGA to select your		B to switch to standby
computer connected to the
VGA 1 connector	POWER	or on again
	B

AV1, AV2, AV3 no function

VGA AV1 AV2 AV3

MENU to switch the menu

	BRIGHTNESS		CONTRAST	on/off
	ZOOM ON/OFF	ZOOM IN	ZOOM OUT	cursor keys to select your
				choice and to alter a
BRIGHTNESS +/-	MENU		OK	selected adjustment.
to adjust the brightness
				OK to activate your choice
level of the picture
CONTRAST +/-				V press - or + to adjust
to adjust the contrast level		MUTE
				the volume
of the picture	V	¬	CH/PR
				¬ Mute key
ZOOM ON/OFF to	1	2	3	Temporarily mute the sound
activate/de-activate the	4	5	6	or restore it
zoom function. See p. 4.				CH/PR Programme
ZOOM IN/OUT to adjust	7	8	9	selection
				To browse through the
	AV MUTE
the zoom factor and to		0		sources selected.
			q

change the magnification of
the picture when zoom is	AV MUTE to temporarily
activated. See p. 4.
	mute the picture and the
	sound or restore it.
	When activated a yellow
	indicator starts blinking in
	front of the monitor.
	q Picture format
	See Picture 2 menu, p. 4.
	Press the q key to switch
	between the different
	picture formats.

If your monitor no longer responds to the	End of life directives
remote control, the batteries may be exhausted.	Philips is paying a lot of attention to produce
How to dispose of batteries ?	environmentally-friendly in green focal areas.
	Your new monitor contains materials which can
The batteries supplied do not contain the heavy
	be recycled and reused.
metals mercury and cadmium. Nevertheless in	At the end of its life specialised companies can
many countries batteries may not be disposed of	dismantle the discarded monitor to concentrate
with your household waste. Please ensure you	the reusable materials and to minimise the
dispose of batteries according to local regulations.	amount of materials to be disposed of.
	Please ensure you dispose of your old monitor
	according to local regulations.

3