11
EN
Troubleshooting
How do I reset my player?
Insert a small pin or other sharp object into the reset hole located at the left of the player. Hold
until the player shuts down.
If none of the above works, then you may have to use the Device Manager to
recover your player:
1Launch the Philips Device Managerat Start > Programs > Philips Digital Audio
Player > SA30XX > Philips SA30XX Device Manager on your PC.
2Press and hold the 2;button while your player is connecting to the PC.
3Keep holding the key until the Philips Device Manageracknowledges your player and goes
into recovery mode.
4Click the Repairbutton and follow the instructions given by the Device Manager.
5After the player has been repaired, disconnect it from your PC and re-start.