Philips SA4DOT04, SA4DOT02, SA4DOT08 user manual Technical data, PC requirements

7 Technical data

Power

•Power supply: 110 mAh Li-ion polymer internal rechargeable battery

•Play time¹

Audio (.mp3): up to 6 hours

•Fast charging: 6-minute charging for 60-minute play

Software

•Philips Device Manager:To update the firmware and recover the player

Connectivity

•Headphone 3.5 mm

•USB 2.0 High speed

Sound

•Channel separation: 45 dB

•Frequency Response: 20-18,000 Hz

•Output power: 2 x 2.4 mW

•Signal to noise ratio: > 84 dB Audio playback

Supported formats:

•MP3

Bitrate: 8-320 kbps and VBR

Sampling rates: 8, 11.025, 16, 22.050, 32, 44.1, 48 kHz

•WMA (unprotected) Bitrate: 5-320 kbps

Sampling rates: 8, 11.025, 16, 22.050, 32, 44.1, 48 kHz

•WAV

Storage media

Built-in memory capacity²:

•SA4DOT02 2 GB NAND Flash

•SA4DOT04 4 GB NAND Flash

•SA4DOT08 8 GB NAND Flash Media transfer³

•Windows Explorer (drag and drop)

Note

•• Specifications are subject to change without notice.

•• ¹ Rechargeable batteries have a limited number of charge cycles. Battery life and number of charge cycles vary by use and settings.

•• ² 1 GB = 1 billion bytes; available storage capacity is less. Full memory capacity may not be available as some memory is reserved for the player. Storage capacity

is based on 4 minutes per song and 128-kbps MP3 encoding.

•• ³ Transfer speed depends on operating system and software configuration.

PC requirements

•Windows® XP (SP3 or above) / Vista / 7

•Pentium III 800 MHz processor or higher

•512 MB RAM

•500 MB hard disk space

•Internet connection

•Windows® Internet Explorer 6.0 or later

•CD-ROM drive

•USB port

EN 13