3 Get started

Charge power

MIX has a built-in battery that can be charged through the USB socket of a computer. Remove the USB cap and connect MIX to a PC.

»»A flashing battery screen indicates that the battery is low.The player saves

all settings and switches off within 60 seconds.

Note

•• Rechargeable batteries have a limited number of charge cycles. Battery life and number of charge cycles vary by use and settings.

•• The charging animation stops and the icon is displayed when the charging process is completed.

To conserve battery power and increase the play time, do the following on MIX:

Set the backlight timer to a low value (go to > [Display settings] > [Screen off timer]).

Note

•• When you connect MIX to a computer, you are briefly prompted to select: [Charge & transfer] or [Charge & play].

•• MIX automatically applies [Charge & transfer], if no new selection is made.

Battery level indication

The display indicates the approximate levels of the battery status as follows:

100%

75%

50%

25%

0%

Switch the player on or off

Press and hold until the player is switched on or off.

Automatic standby and shut-down

The player has an automatic standby and shut- down feature that can save battery power. After 5 minutes in idle mode (no play, no button is pressed), the player switches off.

EN 9

Page 11
Image 11
Philips SA5MXX user manual Get started, Charge power, Switch the player on or off, Automatic standby and shut-down