12 English

Question

Answer

Why does the link

It flashes red because there is no connection.The parent unit may be out

light flash red?

of range of the baby unit or may be set to a different channel than the

 

baby unit. Check if the parent unit and the baby unit are both set to the

 

same channel. If they are, put the parent unit in a different place, closer

 

to the baby unit.

Why does the parent

What you hear is the link alarm. It indicates that there is no link between

unit beep?

the baby and the parent units.The parent unit may be out of range of

 

the baby unit or may be set to a different channel than the baby unit.

 

Check if the parent unit and the baby unit are both set to the same

 

channel. If they are, put the parent unit in a different place, closer to the

 

baby unit.

Why does the parent unit react too slowly to the baby’s sounds?

Why does the parent unit react too quickly to other sounds?

Set the microphone sensitivity on the baby unit to a higher level and/or move the baby unit closer to the baby. Make sure the baby unit is at least 1 metre/3 feet away from the baby.

Set the microphone sensitivity on the baby unit to a lower level and/or move the baby unit closer to the baby.

Why is the connection lost every now and then?

Why do I get interference on the parent unit?

Why does the parent unit pick up signals from another baby monitor?

The parent unit is probably close to the boundaries of the operating range. Put the parent unit closer to the baby unit in a place where it has better reception. Please note that it takes about 30 seconds before the connection is re-established when you move one or both of the units.

You may get interference when the parent unit is out of range of the baby unit.The parent unit may also be too close to a window and pick up interfering signals through this window. Move the parent unit away from the window.

Interference also occurs if there are too many walls or ceilings between the parent unit and the baby unit. Put the parent unit in a different place, closer to the baby unit. Also make sure the units are well away from mobile or cordless phones, radios or TVs.

The baby monitor operates on the same channel as another baby monitor in the neighbourhood. Set both units to a different channel with the channel selector.

Why doesn’t the baby

The specified range of 200 metres is only valid in open air. Inside the

monitor manage the

house the range is limited by the number and type of walls and/or

specified range of

ceilings between the two units. Change the position of one or both units

200m?

to optimise the range.

What happens when

If you are using the units from the mains without having put batteries in

there is a mains

them, the connection will be lost when there is a mains failure. If there

failure?

are batteries in both units, they will automatically switch to battery

 

power in case of a mains failure and the connection will not be lost.

Page 12
Image 12
Philips SBC CS0920/00W manual Why does the link, Light flash red?, To the baby unit, Unit beep?, Baby unit, Monitor manage

9VD200, SBC CS0920/05W, SBC CS0920/00W, SCD480 specifications

Philips offers a range of audio products designed to enhance listening experiences and cater to diverse user needs. Among their impressive lineup are the Philips SCD480, SBC CS0920/00W, SBC CS0920/05W, and 9VD200. Each of these products highlights Philips' commitment to quality, innovative technologies, and user-friendly features.

The Philips SCD480 is a premium digital audio device that combines sleek design with advanced features. One of its standout attributes is the incorporation of innovative digital signal processing technology, which significantly improves sound quality, ensuring clear and dynamic audio reproduction. The SCD480 also features a user-friendly interface, allowing for easy navigation and control. Additionally, it supports various audio formats, enabling users to enjoy their favorite music without compatibility concerns.

Next, we have the Philips SBC CS0920/00W and SBC CS0920/05W. Both models are compact and lightweight, making them ideal for users who prioritize portability without sacrificing sound quality. These speakers utilize advanced acoustic engineering to deliver powerful bass and crystal-clear highs. They are equipped with Bluetooth technology, allowing for seamless wireless connectivity with smartphones and other devices. The SBC CS0920 series also includes built-in rechargeable batteries, making them perfect for outdoor gatherings or on-the-go music enjoyment.

Another notable product in Philips' audio lineup is the 9VD200. This device is designed for optimal versatility, featuring multiple connectivity options such as RCA inputs, AUX input, and USB ports. The 9VD200 focuses on ease of use, with a straightforward control panel for adjusting volume and selecting audio sources. The product is built with durability in mind, ensuring it withstands the rigors of everyday use while maintaining high-quality sound performance.

Overall, Philips' audio products, including the SCD480, SBC CS0920/00W, SBC CS0920/05W, and 9VD200, showcase an impressive blend of technology and design. These devices cater to a wide range of audio preferences and lifestyles, ensuring that users can enjoy their favorite music in various environments, whether at home, at a party, or on the move. With a reputation for reliability and quality, Philips continues to be a trusted name in the world of audio technology.