Philips SBCRU530, 87U Instructions for use Installing the remote control, Inserting the batteries

TV VCR SAT

RU530_87.qxd 04-06-2004 16:57 Pagina 4

English

Instructions for use

2. Installing the remote control

Inserting the batteries

1Press the cover inwards and slide it in the direction of the arrow.

2Place two R03, UM4 or AAA type batteries into the battery compartment, as shown.

3Slide the cover back and click it firmly into place.

Testing the remote control

The remote control has been programmed to operate most Philips appliances. Because the RU530 may use different signals for each make and even for different models of the same make, it is advisable to test whether your appliance responds to the RU530.

The example below (TV) instructs you how to do this.

You can repeat the same steps for other appliances (VCR, satellite or cable decoder) which you want to operate using the RU530.

Example of TV:

1Turn your TV on manually or use the original remote control. Tune to channel 1.

2Use the RU530’s mode selector to

select TV. Press the key until the green light under TV in the selector window lights up. If no green light appears, check whether the

batteries are properly inserted (see ‘Inserting the batteries’).

3Check whether all the keys are working.

	For an overview of the keys and their	PROG
	functions see ‘3. Keys and functions’.	VOL
–	If the TV responds as it should to all of the	PROG
	key commands the RU530 is ready for use.
		M
		E
		NU

AV

VOL

OK

•If the device does not respond at all or not to all of the key commands, follow the instructions under

‘Setting the remote control’.

4