Vermont Casting DV580 Remote Controls, Ceramic Refractory Panels, Decorative Bay Windows, Unit

Remote Controls

Optional remote control units are available to control different functions of the appliance.

Model	Functions Controlled
RC1	ON/OFF
RC2	ON/OFF and Temperature
MRC3	ON/OFF and Temperature control with
	a digital display and a programmable
	24 hour clock
IMT	Wall mounted thermostat control

Ceramic Refractory Panels

Ceramic refractory panels are available to line the fire- box area.

Unit	Kit Model
DV360	DV360CRSS	Sandstone
DV360	DV360CRR	Red
DV360	DV360CRB	Black
DV360	DV360CRG	Grey
DV580	DV580CR

Take care when handling the refractory panels as they are fragile until held in place and supported.

Installation Instructions

1.Remove window frame assembly and logs.

2.Remove three (3) screws securing heat shield to combustion dome. (Fig. 82)

3.Place rear ceramic panel in back of unit. (Fig. 83)

4.Place side panels.

5.Replace heat shield, logs and window frame assem- bly.

Heat Shield	Section A
	Heat Shield
	(3)
	Screws
	Side View
	Section A
	H103
Fig. 82 Heat shield.

DV360/580 Series Direct Vent Gas Fireplace

	Rear Ceramic Panel
	Back of
	Firebox
Burner
	Rear Log
	Support
	H102
Fig. 83	Rear ceramic panel placement.

Decorative Bay Windows

The bay window kit is available for the DV360 only.

Installation

Remove the existing louvre assembly top.

Assemble the Bay Window Kit according to the instruc- tions supplied with the kit. (Fig. 84)

	Upper Grille Assembly
Ceramic
Refractory	Ceramic
	Refractory
Window
Assembly
Base Grille
Assembly	FP1194
Fig. 84 Bay window.

Decorative Frame Trims

A selection of decorative frame trim kits are available for mounting around the outside of the appliance to en- hance its visual effect on the room. Installation instruc- tions for each decorative frame trim are included with the frame trim kit. Contact your authorized distributor for details of the trim kits and ordering information for the trim kits applicable to this model appliance.

20010667 49