| Screw | Burner | Screw |
| Hearth Panels |
| Grate |
|
|
| |
|
| Front of Unit | H100a |
|
|
| |
Fig. 48 | Hearth panel location. |
|
Installation of Logs
DV360/580 Series Direct Vent Gas Fireplace
Log Identification Chart
Logs | DV360 |
| DV580 |
| |||
Log Front Left | 20010673 |
| E9 |
Log Front Right | 20010672 |
| E10 |
Log Rear | 20010675 |
| E8 |
Log Top Left |
| E12 | |
Log Top Right | 20010676 |
| E13 |
Log Front Center |
| E11 | |
Log Top Center | 20010677 |
| |
Log Overlay | 20010674 |
| |
|
|
|
|
Remove front glass. (Refer to “Window Frame As- sembly Removal” Section, Fig. 47) Remove logs from packaging.
As with all plastics — these are not toys and should be kept away from children and infants.
| DV360 |
| ||
NOTE: Refer to Figure 49 for bracket and bend loca- |
|
| ||
tions. |
| Stop | Rear Log Bracket | |
1. Place log rear. The rear log sits in the firebox at an | Bracket | |||
| ||||
| Pilot | |||
angle toward the left over the rear log bracket and |
| |||
| Bracket | |||
the left side of the burner. (Fig. 49) Set the log on the |
| Bend | ||
|
| |||
rear log bracket. The notch on the right side will go |
|
| ||
over the pilot. Swing the left end of the log toward |
|
| ||
the front until it makes contact with the stop bracket. |
|
| ||
Slide the log to the right so the pilot notch on the | Front Left |
| ||
log makes contact with bend on the left of the pilot |
| |||
Bend |
| |||
bracket. (Fig. 50) |
| Left Edge |
| |
|
|
| ||
|
| of Bracket |
| |
Figure 50 | Log Rear | Front Brackets |
| |
| FP1607 | |||
|
|
| ||
|
| Fig. 49 Burner brackets and bends. |
|
Pilot Notch
Stop Bracket
LG960
20010667 | 25 |