English 21
1Switch off the appliance, unplug it and let it cool down.
Note:The light exit window becomes hot during use. Make sure it has cooled down before you clean it.
2To remove the attachment, put your fingers in the recesses at the top and bottom and pull gently.The attachment should come off easily.
3Moisten the soft cloth supplied with the appliance with a few drops of water and use it to clean the following parts:
Note: If water does not clean effectively, use a few drops of
Note: A contaminated light exit window and/or attachment can look like this picture. Make sure you clean the appliance before and after each use and, if necessary, also during the treatment according to the instructions in this section.
Tip: If it is no longer possible to clean the edges of the attachment with the enclosed cleaning cloth, use a cotton bud instead. Make sure that no fluff or fibres stay behind on the attachment or on the light exit window.
4If necessary, clean the outside of the appliance with the dry soft cleaning cloth supplied with the appliance.
Storage
1Switch off the appliance, unplug it and let it cool down.
2Clean the appliance before you store it.
3Put the appliance in the pouch supplied.
4Store the appliance in a dry place at a temperature between 0°C and 60°C.
Replacement
If you have to replace a part or want to purchase an additional part, go to your Philips dealer or visit www.philips.com/support.
If you have problems obtaining the parts, please contact the Philips Consumer Care Centre in your country.
Replacement parts
The following replacement parts are available:
