AC HAN N
BE L
O
N
V
O
L
U
ME
O
F
F
DC
9V
LEVEL
SYSTEM CHEC K
+ +
+
ENGLISH 7
Features explanation
Avoiding interference
•If there is interference or if sound reception is poor, switch both units to another channel.
Always make sure that the channel selection switches (4 and 10) on both units are set to the same position.
Monitoring baby silently
•Adjust the volume on the Parent Unit to the lowest level using the VOLUME ON/OFF control (14) (do not switch off).
>The
Checking that the units are in touch
•Check that the digital SYSTEM CHECK light (11) on the Parent Unit lights continuously (green) to confirm that the connection between both units is reliable.
If the light flashes (red), move the Parent Unit closer to the Baby Unit.
The light flashes if the units are out of range for more than 30 seconds or if there is interference.
Switching on the system check alarm
You can switch on the system check alarm on the Parent Unit that beeps when the units are not in touch.The Parent Unit is delivered with the system check alarm switched off.
1 Open the Parent Unit’s battery compartment cover (17).
2 Set the switch (18) inside compartment to the ON position ( ).
3 Close battery compartment cover (17).
The SYSTEM CHECK light (11) can still flash even if the system check alarm is switched off.
Range 200m in open air
The baby monitor has an operating range of up to 200 metres in ideal