SBC SC468/00:
from 40.695 to 40.675 MHz
4 Close battery compartment cover. Remove the battery-pack from the Parent unit if it is not used for long periods.
Batteries
Dispose of used batteries in an environmentally friendly manner. Do not mix old and new batteries, or different types of batteries. Remove Baby unit batteries if the baby monitor is not to be used for long periods.
Technical specifications
• Battery pack; rechargeable NiMH for Parent unit (included).
• Optional batteries 4 x 1.5V;AA alkaline for Baby unit (not included).
• AC power adapter 230V AC, 50 Hz (two included): - Output voltage 9V DC, 200mA.
• Only use the AC power adapter included.
• Up to 200 metres in ideal conditions (walls, floors, etc. can limit this distance).
• 10°C to 40°C.
• Continuous communication link (hidden signal helps reduce interference and ensures a continuous link between both units so you only hear your baby’s sounds).
Disconnect the old battery pack from the power plug and remove.
Open the Parent unit’s battery compartment cover.
1
2
3 Carefully connect the new battery pack to the power plug and place inside the battery compartment.
Replacing the Parent unit’s battery pack
XP SBC SC 468 book
8ENGLISH
5
- | SENS |
5
- | SE |
Using batteries
Operating the Baby unit cordlessly
1 Remove the battery compartment cover using a coin.
2 Insert four 1.5V, LR6 (AA) batteries noting the + and - configuration inside the battery compartment.
Batteries not included; we recommend
3 Put the cover back in place and secure using a coin.
>If the power light flashes (red) install new batteries. The unit operates for up to 30 hours on batteries.
Power supply:
Operating range: Operating temperature: Digital Pilot tone:
Transmission frequencies:
