Installation
Before connecting the Baby Bottle Warmer to the mains,check to
ensure that the mains outlet is 230V AC.
1Place the Baby Bottle Warmer out of the reach of children
and on a dry,non-slip, horizontal surface.
2Turn the click-step control knob 4to the left to the
‘0’ (OFF) position.
> The indicator lamp lights green.
3Unreel the required cable length from the cable reservoir 8
and plug into the mains outlet.
OperationWarming of baby bottles
1Turn the click-step control knob 4to the left to the
‘0’ (OFF) position.
2Connect the bottle warmer to the mains socket.
> The indicator lamp lights green.
3Fill the beaker with 10 or 20ml water by using the water cup
of the ring 6.The content is depending on the bottle filling
and start temperature (see Heating Overview on page 3).
4Place the bottle in the middle of the beaker and put the ring
6on top of it.
5Use the click-step control knob 4to set the correct setting
(see Heating Overview on page 3).
> The indicator lamp lights red.
> When the right temperature is reached the indicator lamp
will light green.
6Remove the bottle from the container and turn the control
knob to the ‘0’ (OFF) position.
ENGLISH 5