EN Philips AVENT Express Bottle and Baby Food Warmer

Philips AVENT Express Bottle and Baby Food Warmer EN

Instructions for use

9. If the food is not ready, replace the

9. Do not use outdoors.

10Do not let cord hang over edge of table or counter, or touch hot surfaces.

11.Do not place on or near a hot gas or electric burner, or in a heated oven.

12.Extreme caution must be used

when moving an appliance containing hot oil or other hot liquids.

13.Do not use appliance for other than intended use.

14.When in use the warmer contains hot water.

15.Before plugging in the warmer for the first time, ensure the voltage is compatible with your electrical supply by checking the label on the base of the unit.

16.Always place bottle into warmer before adding water.

17.Ensure water has been added before switching the unit on.

18.When the food has reached the required temperature, remove immediately. If left in the warmer, the temperature of the food will continue to increase.

19.The Express Warmer is fitted with a non-rewireable molded plug. The mains supply cord of the appliance CANNOT be replaced. If the cord is damaged, the appliance should be discarded.

20.This product is manufactured

to comply with the Radio Interference Requirements and the EEC Directive 89⁄336⁄EEC.

21.A short power cord has been provided to prevent the risk of it becoming entangled or being tripped over.

22.Extension cords may be used if care is exercised in their use.

23.If an extension cord is used, its electrical rating must be as great as the rating of the appliance and not draped over the edge of the table top where it could be pulled by children or tripped over. The extension cord should be a grounded type 3 wire cord.

24.Failure to follow de-scaling instructions may cause irreparable damage.

25.There are no serviceable parts inside the Express Warmer. Do not attempt to open, service or repair the Express Warmer yourself. For assistance call 1-800-54-AVENT (1-800-542-8368).

SAVE THESE

INSTRUCTIONS

For AVENT Airflex Natural Feeding Bottles

1.Ensure basket is in place inside the warmer.

2.Place the assembled, filled bottle in the warmer with the dome cap removed.

3.For 4oz ⁄ 125ml bottles, fill the warmer with water to just above the level of milk in the bottle.

4.For larger bottles, fill the warmer to 15mm (1⁄2 inch) below the rim of the warmer.

5.Never let the water level rise above the neck of the bottle or spill over the edge of the warmer.

6.Plug the unit into an electrical outlet and click the switch to the ON position (I), the neon light will illuminate. Turn the dial to setting 3.

7.When the bottle has been in the warmer for the appropriate time (See guide), the light will flash on and off intermittently to indicate that the water surrounding the bottle is being kept at a constant temperature.

8.Remove immediately. Replace the dome cap. Shake the bottle and test the temperature of the liquid by sprinkling a few drops onto the back of your hand. Please ensure the lid of the container is tightly secured prior to shaking.

bottle in the warmer. TAKE CARE NOT

TO OVERHEAT. The water surrounding

the bottle will be kept at a constant

temperature but the temperature of the

food will continue to increase. If the food

is too hot, allow to cool. Always test

temperature before feeding.

10. Once the bottle has reached the correct

temperature and has been removed from

the unit, switch off warmer (O) and unplug

from the electrical outlet.

Note: The basket can be removed when

heating the AVENT Magic Cup and other

makes of bottles.

For the AVENT Tempo Natural Feeding Nurser

1.Ensure basket is in place inside the warmer.

2.Place the assembled, filled Tempo Nurser in the warmer with the dome cap removed.

3.Fill the warmer with water to the level of milk in the bottle liner.

4.Plug the unit into an electrical outlet and click the switch to the ON position

(I). The neon light will illuminate. Turn the dial to setting 2 and continue as 7–10 above.

Note: When using Tempo liners please ensure that you choose the correct settings as using a higher selection may cause liners to burst.

4

5

Page 2 Page 4
Page 3
Image 3
Philips SCF255/33 Save These Instructions, Instructions for use, EN Philips Avent Express Bottle and Baby Food Warmer
Page 2 Page 4

SCF255/33 specifications

The Philips SCF255/33 is a baby bottle designed to simplify feeding for both parents and infants. This innovative bottle offers a range of features and technologies aimed at enhancing the feeding experience while addressing common concerns related to breastfeeding and bottle-feeding.

One of the standout features of the SCF255/33 is its unique Natural Response Nipple. This nipple mimics the shape and feel of a breast, ensuring that the transition between breastfeeding and bottle-feeding is as seamless as possible. The nipple is designed to allow the baby to control the flow of milk, promoting a more natural feeding rhythm. This is particularly beneficial for babies who have recently breastfed, as it encourages them to latch comfortably and suck as they would from the breast.

In addition to its innovative nipple design, the SCF255/33 is constructed from high-quality materials that are free from harmful substances such as BPA. Parents can have peace of mind knowing that the bottle is safe for their little ones. The bottle's wide neck design also makes it incredibly easy to fill and clean, addressing one of the common frustrations parents face with traditional baby bottles.

The Philips SCF255/33 is also compatible with other Philips Avent products, making it easier for parents to build a feeding system that suits their needs. This compatibility is particularly advantageous for parents who may choose to use both bottles and breast pumps, allowing for versatility in feeding options.

Another aspect that sets this baby bottle apart is its anti-colic system, which is meticulously designed to reduce air intake during feeding. This feature helps to minimize discomfort and gas-related issues in babies, contributing to overall better digestion and comfort during and after feeding sessions.

The bottle is available in different sizes, allowing parents to select the perfect option based on their baby's age and feeding needs. Additionally, the sleek and ergonomic design of the Philips SCF255/33 ensures that parents can hold and handle the bottle with ease, even during long feeding sessions.

In summary, the Philips SCF255/33 stands out in the crowded market of baby bottles with its thoughtfully engineered features, safe materials, and user-friendly design. It caters to the needs of both parents and infants, making feeding a more enjoyable experience for everyone involved. With its commitment to promoting breastfeeding and minimizing feeding difficulties, the SCF255/33 solidifies its place as a preferred choice for contemporary families.
Top Page Image Contents