10
Warning
•The power inserter and power sup ply are for
indoor use only.
Tip
•This antenna include s a 6m roll of 3C-2V
coaxial cable. If thi s is not adequate for your
needs, replace the ca ble with a RG-6 coa xial
cable instead of adding a n extension.
Set up a digital tuner with this antenna
You can install available channels with the digital
TV tuner. This automatic process is part of the
setup of the tuner. Ensure the antenna has
set up properly before the tuner can receive
viewable channels.
There are two ways to connect the antenna to
the TV:
• Connect the antenna to a di gital tuner.
If the signal streng th is good enough, the
channels can be memori zed in the tuner
automatically .
• Connect the antenna di rectly to the TV.
Tunetotheanaloguechannelsandn d
the best antenna locat ion. Then re-
connect the antenna to th e digital tuner.
Ensure the signal str ength is good enough
before you install the cha nnels with the
tuner.
Connect to the TV
Note
•Aspreviouslynoted ,theamplier(Power
inserter + Power supp ly) must be placed in-
line between the ante nna and any splitt er or
additional devices.
1 Connect the coaxial cable from the
antenna to the connector l abeled ANT
on the power inserter .
2 Connect the power inserter to the
antenna input on the T V, digital set-top
box, splitter or othe r devices.
3 Connect the power suppl y plug to
the power inserter , and then plug the
power supply adaptor into a 100-240V
AC receptacle.
EN