![](/images/new-backgrounds/1197768/197768103x1.webp)
Note
By default, the PIN is 0000.
1On the base station, press and hold a for 3 seconds. A beep sounds to
indicate that the base is ready to accept registration.
Note
If no action is taken on the handset within 90 seconds, the registration procedure will be aborted. If this happens, repeat from Step 1.
2On the handset, press m, scroll n to Advanced Set and press o
Select.
3Scroll n to Register and press o Select.
4Enter the PIN when prompted and press o OK to confirm.
Registering… is displayed on the screen.
•Upon successful registration, a validation tone is emitted and the handset number (1 to 8) will be assigned by the base automatically.
10.6.1 Easy registration
1Insert the unregistered handset in
the base station to automatically begin registration.
2Registering… is displayed on the screen.
•Upon successful registration, a validation tone is emitted and the handset number (1 to 8) will be assigned by the base automatically.
50
Note
The easy registration is possible only when PIN has not been changed and is still the default PIN 0000.
10.7Unregister
1Press m in idle mode, scroll n to
Advanced Set and press o
Select.
2Scroll n to Unregister and press o Select.
3Enter the PIN when prompted and
press o OK to confirm.
4Scroll n to select the handset number to unregister and press o
Select. Press o OK to confirm.
•A validation tone is emitted to indicate successful unregistration.
Note
A registered handset other than one of the model described in this manual can only be unregistered using a handset described in this manual.
10.8Reset Unit
You can reset your phone to its default settings with this feature. (see 10.14 “Default Settings”)
Caution
Upon reset, all your personal settings, call log and redial list entries will be deleted and the phone will return to its default settings. However, your phonebook will remain unchanged after reset.
Note
You may have to configure your phone once again.
Advanced settings