Philips SHB4000 Use the headset, Connect the headset to a mobile phone, Automatic power saving

4 Use the headset

Connect the headset to a mobile phone

1Turn on your mobile phone.

2Press and holdto turn the headset on.

»»The blue LED flashes.

»»The headset is reconnected to the last connected device automatically. If the last one is not available, the headset tries to reconnect to the second last connected device.

Tip

•• If you turn on the mobile phone or its Bluetooth feature after turning on the headset, connect the headset from the Bluetooth menu on your mobile phone.

Automatic power saving

If the headset fails to connect any Bluetooth device within range in five minutes, it powers down automatically to save the battery life.

Use your headset

Task	Operation	Sound or LED
		Indicator

Turn the	Press and		• 1 long beep
headset off.	hold	for	• 1 long white
	more than 4
			flash
	seconds
Play or pause	Press		1 short beep
music.
Pick up or	Press		1 short beep
terminate a
call.
Reject a call.	Press and		1 short beep
	hold
Redial the	Press		1 short beep
last number.	twice
Switch caller	Press		1 long beep
in a call.	twice
Adjust	Press +/-		1 short beep
volume.
Skip forward.	Press and		1 short beep
	hold +
Skip	Press and		1 short beep
backward.	hold -
Other status and indicators
Headset status			Indicator
The headset is connected			Blue LED
to a Bluetooth device, while			flashes every 6
the headset is in standby			seconds.
mode or while you are
listening to music.
The headset is ready for			LED flashes
pairing.			whiteand
			bluealternately.
The headset is on but not			Blue LED
connected to a Bluetooth			flashes fast.
device.
There is an incoming call.			Blue LED
			flashes twice

E n g l i s h

Turn the	Press and
headset on.	hold	for
	more than 1
	second

1 short beep

•1 blue flash:

Battery level > 50%

•1 white flash:

Battery level < 50%

	per second.
Low battery.	White LED
	flashes.
Battery is fully charged.	White LED is
	off.

EN 7