Philips SLV3220 Interference on, Receiver or the transmitter, Video sources, To the receiver

EN

Troubleshooting

Problem	Tip
Interference on	•	Slightly change the position of the
the image of TV2.	•	receiver or the transmitter.
		Change the wireless channel that
		is used for communication. See
	•	page 7.
		The receiver (B) is out of range of
		the transmitter (A). The number
		of walls and ceilings in between
		the receiver (B) and transmitter
		(A) restrict the distance.
The video sources •		Point the remote control directly
do not respond to	•	to the receiver.
the remote con-		Replace the batteries of the
trol commands	•	remote controls with new ones.
from TV2.		Install the remote control blaster
	•	cord (F). See page 6.
		The maximum operating distance
		of the remote control is 5 m.
The television	•	Turn off the auto standby mode
program disap-		of the video source. See its user
pears on TV2.	•	manual.
		Follow the instructions to recon-
		nect the video sources. See the
		quick start guide.
Buzzing sound	•	Slightly change the position of the
when you use the		receiver or the transmitter until
remote control.	•	the buzzing sound stops.
		Sometimes it is not possible to
		solve the problem.
Easylink feature	•	Check if the TV and VCR support
does not work.	•	Easylink.
		Check if you used full-wired
		SCART cables.
Black and white	•	Check if the SCART connector of
image with S-VHS		the S-VHS VCR gives signal in
VCR.		CVBS. See its user manual.

10