Firmly insert the SCART cables to the ports:
1.Plug the connector straight into the port.
2.Apply some force when you insert the connector.
D Connect the power adapter
1.Take the supplied power adapter (E).
2.Plug the connector into the DC 12V power connector on the transmitter (A).
3.Plug the adapter into the power outlet.
> The power light on the front comes on as red.
E Check the operation of TV1
AC |
L |
|
| DC 12V |
| Channel |
R | 1 2 3 4 |
|
2
3
1
1.Switch on TV1.
2.Switch on the connected video source.
3.Select the correct SCART input on TV1.
4.Check if TV1 shows the image of the video source. > The transmitter is connected correctly.
2 Connect receiver
A Preparation
1.Switch on the transmitter (A).
2.Switch on the video source.
3.Take these items:
•Receiver (B)
•Remote control (C)
•Remote control of a video source.
•SCART cable (D)
•Power adapter (E)
•This quick start guide (F)
4.Go to TV2.
STANDBYSELECT
R
SLV5400 WIRELESS TV LINK TRANSMITTER
1
