Connect TV2
3
2
1
TV2
TV2

AC

3
2
1
DC 12V DC 12V
WIRELESS TV LINK RECEIVER
2
1
4 5
TV2
B
Connect the power adapter
C
Check the operation of TV2

D

1.Take the supplied SCART cable (D).
2.Plug one end into the TV2 SC ART port on
the receiver.
3.Plug the other end into the SC ART port of
the TV.
1.Switch on TV2.
2.Switch on the receiver (B).
3.Select the correct SCART input on TV2.
4.Point the remote control of the video
source to the receiver (B).
5.Operate the video source with its remote
control.
6.Check if TV2 shows the image of the video
source.
> The receiver is connected correctly.
1.Take the supplied power adapter (E).
2.Plug the connector into the DC 12V power
connector on the receiver (B).
3.Plug the adapter into the power outlet.
> The power light on the front comes on as red.