Connecting the WebCam to your PC /
laptop
General
1Be sure to run the installation CD first,before connecting the
WebCam to the PC / laptop.
2Turn on the PC / laptop.
3Connect the USB connector of the USB cable to the USB port
of the PC / laptop.
>
The
WebCam
will now derive its power from the PC / laptop.
4
Aim the webcam as required.
5
Push the USB cable into the cable management slot.
6Use the clamp and the two rubber rims to attach the WebCam
to your PC monitor or laptop screen.
SPC220NC WebCam
7Peel off the protective foil on the rear of the microphone
(SPC220NC only)
and attach the microphone to the PC monitor
or laptop screen.
8Connect the microphone plug to the microphone or green
socket of the sound card.
Installation
EN
10
7
3
3
5
66
8
5