ENInstallation

Connecting the WebCam to your PC / laptop

6

 

6

5

5

 

 

 

3

7

8

 

3

1Be sure to run the installation CD first, before connecting the WebCam to the PC / laptop.

2Turn on the PC / laptop.

3Connect the USB connector of the USB cable to the USB port of the PC / laptop.

> The WebCam will now derive its power from the PC / laptop.

4 Aim the webcam as required.

5 Push the USB cable into the cable management slot.

6 Use the clamp and the two rubber rims to attach the WebCam to your PC monitor or laptop screen.

7 Peel off the protective foil on the rear of the microphone (SPC230NC/00, SPC230NC/27) and attach the microphone to the PC monitor or laptop screen.

8 Connect the microphone plug to the microphone or green socket of the sound card.

10

Page 10
Image 10
Philips SPC230NC Connecting the WebCam to your PC / laptop, WebCam will now derive its power from the PC / laptop