3 Get started
This surge protector is designed to guard the connected equipment against electrical damage. Philips offers an entire line of surge protectors to safeguard your home electronics and computer systems.
IN/OUT phone protection
1 Connect your phone/fax/modem line from your wall outlet to the input jack on the surge protector.
2 Connect one end of a phone cord into the output jack on the surge protector, and the other end to the phone/fax/ modem jack of the device.
English
Connect the surge protector
1 Plug the power cord into a properly grounded outlet.
2 Plug the component power cord into the surge protector.
Caution
•• Do not use any extension cords, adapters, other grounding wire or electrical connections with your surge protector. Doing so will void all Philips warranties.
Connect the surge protector to a phone/fax/modem
Some Philips surge protector models come with phone/fax/modem surge protection, Instead of running a connection directly from your phone/fax/modem to the wall jack, pass the connection through the protected jacks on your surge protector.
Splitter phone line protection
If you have one telephone number for both your modem and telephone, you can split the incoming phone line into two outs:
1
2
Note
•• You cannot use the modem or phone at the same time.
Device phone line protection
This is an advanced
EN 3
