4Press and hold the key that does not
| function and immediately release it when | |
| the device responds. | |
• | If the key still does not function as expected, | |
| try pressing it again for a longer period of | |
5 | time. |
|
Press the | device | |
selection key twice |
| ||
to save your settings |
| ||
and exit setup |
| ||
mode. | 2 x | ||
• | When no key | ||
| |||
is pressed for 5 minutes or more, the remote control will exit setup mode, automatically saving all your settings.
3Using the universal remote control
Using the universal remote control English
3.1Keys and functions
The illustration on page 2 gives an overview of all keys on the remote control.Try out the keys you need for operating your devices.
Notes
•Keys having the same functions as the keys on your original remote control may have different namings on the SRP2003 (e.g. Info / Display).
•Only functions that are available on your original remote control can be used for operating your devices with the SRP2003.
1 | Setup light. |
•lights up red when the remote control is in setup mode.
•lights up red when a remote control command is being sent.
2 | selects available source |
| |
| inputs (antenna, cable, |
| |
| etc.). |
|
|
3 | device selection keys. |
| |
| Select the device to be |
| |
| operated. |
|
|
|
| EN | 9 |
P2003_27__Manual_80_210.indd 9 |
