•The PrestigoSync Install Wizard screen appears. If the screen does not appear automatically, open ‘My computer’ double click on the
2Click the ‘Next’ button and follow the
4.10.1Synchronizing data between the remote control and your PC
1Make sure both PC and remote control are turned on.2Connect the USB cable supplied
between the USB port of the remote control and a USB port of the PC.• The PrestigoSync application will now be launched automatically.3 You can now modify the icon libraryand synchronize back to the remote control by pressing the ‘Sync’ button.•For more detailed information and support, refer to the PrestigoSync user manual that can be found under ‘PrestigoSync Help’ or by pressing F1 on your PC keyboard.
5 Frequently asked questions
In this chapter you find answers to the most frequently asked questions about your universal remote control.
Setup
I cannot enter ‘Setup’ mode.Battery level too low.•Recharge the battery. For this refer to chapter 2.1 ‘Charging the battery’. Battery lifetime came to an end (battery cannot be recharged anymore).
•Replace the battery. For this refer to chapter 7.2.2 ‘Replacing the battery’.
How do I set up the remote control for combo devices (TV / VCR, TV / DVD, DVD / VCR, etc)?
Some combo devices require you to set up two different source selection buttons to control both parts of the combo device. For example, if you have a TV / DVD combo, you might need to set up the remote control for both TV and DVD to operate your TV / DVD combo.
In the Activity menu you can create an activity enabling you to operate both combo devices. for this, refer to chapter 4.3 ‘Setting up activities’.
How do I set up the remote control for my Home Theater System? You may have to set up the remote control for all devices in your Home Theater System separately.
In the Activity menu you can create an activity enabling you to operate all devices in the system. for this, refer to chapter 4.3 ‘Setting up activities’.
EN 20