Setup, cont.
Any Mode chosen for Volume/Mute control MUST have its own Volume/Mute function or the Volume/Mute buttons will do nothing.
Setting ALL Volume/Mute Control to any one Mode
This routine can set all Modes to
1.Press and hold the SETUP button until the red indicator turns on, then release the button.
2.Press and hold the MUTE button until the red indicator blinks off, then release the button.
3.Press and release the desired Mode button (TV, VCR, etc.) for Volume/Mute control, the red indicator blinks then stays on.
4.Press and release the MUTE button and the red indicator turns off. The red indicator will blink rapidly for three seconds if the Mode you have selected has no Volume/Mute control.
5.All other Modes will now
6.All “Visual” and “Audio” programmed Modes will now
Setting any Mode to use its own Volume/Mute Control
This routine can set any Mode to use only its own Volume/Mute control. Note - If your chosen Mode has no Volume/Mute functions of its own then the Volume/ Mute buttons will do nothing.
1.Press and hold the SETUP button until the red indicator turns on, then release the button.
2.Press and hold the MUTE button until the red indicator blinks off, then release the button.
3.Press and release the desired Mode button (TV, VCR, etc.), the red indicator blinks then stays on.
4.Press and release the VOLUME- (Down) button, the red indicator blinks then stays on.
5.Press and release the MUTE button and the red indicator turns off.
6.All “Visual” and “Audio” programmed Modes will now
14
Clock Setup and Functions
Setting the date and time
Set date and time using a pencil or paper clip to press the SET and ENT buttons below the clock display.
1.Press SET twice. A number between 1 to 12 for the month appears in the left of the display, press and hold ENT until the current month is displayed, then release the ENT button.
2.Press SET once to save the month and call up the settings for the date.
3.Press and hold ENT until the current date is displayed, then release the ENT button.
4.Press SET once to save the date and call up the settings for the hour.
5.Press and hold ENT until the current hour is displayed, then release the ENT button.
6.Press SET once to save the hour and call up the settings for the minute.
7.Press and hold ENT until the current minute is displayed, then release the ENT button.
8.Press SET once and the set time is displayed.
9.Press ENT once to start the clock (the colon flashes in intervals of 1 second).
To display date and time
After completing the settings, the time is displayed. Press ENT once to display the date. If you want to have alternating time and date displayed, press and release ENT and then SET. To switch off this function, press and hold ENT until the time is displayed.
To display the seconds
When the time is displayed, press ENT twice to display the seconds.
When the date is displayed, press ENT once to display the seconds.
When seconds is displayed, press and release SET to set the seconds display to “00.”
When seconds is displayed, press and release ENT to switch back to time display.
15
10/9/2006, 2:49 PM
