Philips SV1 3. Set up

•Use the Zoom ring to adjust the size of the image.

•Use the Focus ring to adjust the focus of the image.

To raise the projector

1Press the Elevator button (A).

2Raise the projector to the desired display angle,

then release the button to lock the elevator foot (B) into position.

3Use the horizontal adjuster (C) to fine-tune the display angle.

To lower the projector

1Press the Elevator button (A).

2Lower the projector to the desired display angle,

then release the button to lock the elevator foot (B) into position.

3Use the horizontal adjuster (C) to fine-tune the display angle.

If the projector and screen are not properly placed, the picture will be distorted, producing a

keystoned image (picture top width larger than picture bottom width or vice versa).When a

keystoned image occurs the 4:3 ratio will still be guaranteed.This is especially impor tant when

the projector is being used together with an ‘intelligent whiteboard’.

‘Keystone correction’allows you to correct picture distortion of the vertical keystone type by

internal scaling.

•Use Keystone to widen the image.

•Use Keystone to narrow the image.

These functions are also accessible through the ‘Keystone’option in the ‘Setup’menu of the On

Screen Display (OSD) menu.

Preparation

1Press the Standby button twice to put the projector in Power/Standby.

–The Standby indicator light is red.

2Wait until the cooling fan has stopped (about 2 minutes after the projector has been put in

Standby) and disconnect the mains lead and all other cables.

3Put the lens cap back in place to prevent damage to the front of the lens when

moving/transporting the projector.

Never place the projector on the side where the connections are located.

Moving/transporting the projector

The projector contains many glass and precision parts. If you need to transport the projector,

please follow these packing instructions to prevent accidental damage to the projector.

•When you are hand-carrying the projector, be sure to use a carrying case like the softbag

supplied.

•When shipping the projector,use the original packaging material if possible. If you do not

have the original packaging, use equivalent materials,placing plenty of cushioning around the

projector.

•When transporting the projector as freight or checked luggage, first put it in the softbag