Philips SVD101AT99 owner manual Back of TV Example only DVD Player

12 Hookups (cont’d)

Connecting to a TV and an Amplifier with Digital Input jacks, Mini-Disc Deck or

Digital Audio Tape Deck

●Use a coaxial digital audio cable (not supplied) for this connection.

●If the Disc is recorded in 5.1 channel Dolby Digital Surround, you cannot dub the Disc in digital sound using a Mini-Disc or Digital Audio Tape Deck.

●Set DOLBY DIGITAL and DTS to OFF on the DVD Player. Details are on pages 38-39.If you play a DVD when the settings are wrong, the sound will be distorted or you may damage the speakers.

2

1

VIDEO IN

Back of TV

(example only)

DVD Player

DIGITAL AUDIO OUT	AUDIO OUT
PCM/BITSTREAM
COAXIAL
S-VIDEO	VIDEO R	L
OUT	OUT

1	COAXIAL DIGITAL	Back of Amplifier
		(example only)
	AUDIO IN

Connect a coaxial digital audio cable to the COAXIAL jack on the DVD Player and to the COAXIAL DIGITAL AUDIO IN jack on the Amplifier.

2

Connect the supplied video cable (yellow) to the VIDEO OUT jack on the DVD Player and to the VIDEO IN jack on the TV. (Or, you may con- nect an optional S-Video cable to the S-VIDEO OUT jack on the DVD Player and to the S-VIDEO IN jack on the TV.)

3

Plug in the Amplifier’s power cord. Turn on the Amplifier and select the Auxiliary IN station. During Disc playback, you will adjust the volume at the Amplifier. See your Amplifier owner’s manual for details.

4

Plug in the TV’s power cord. Turn on the TV and set it to the Video In channel (or S-Video In channel). This channel usually is located near channel

00.During Audio CD playback, you may check the status of the Disc on your TV screen. During DVD playback, you will watch the program on the TV. See your TV owner’s manual for details.

5

Plug in the DVD Player’s power cord. Press the POWER button to turn on the DVD Player. “HELLO” will appear briefly on the DVD Player’s display panel. You should see the DVD logo on the TV. If you do not, check your connec- tions and make sure the TV is on the correct channel.