Manuals / Philips / TV and Video / VCR

Philips SVZ142 owner manual Specifications

Models: SVZ142

1 48

Download 48 pages 58.27 Kb

Page 45

SVZ142.comb 4/7/99 6:30 PM Page 45

Specifications 45

Video Heads

Four heads

Video Signal

EIA standards; NTSC color

Antenna

VHF/UHF – 75 ohm external antenna terminal

VHF Output Signal

Channel 3 or 4 (switchable) 75 ohms unbalanced

Power Requirement

120V AC; 60Hz

Power Consumption

16W

Operating Temperature

41°F (5°C) to 104°F (40°C)

Relative Humidity

10% to 80%

Weight

5.5 lbs. (2.5 kg.)

Dimensions

14-3/16” (W) x 3-1/16” (H) x 9-3/16” (D) (360 mm x 92mm x 230mm)

Tuner Broadcast Channels

VHF 2-13, UHF 14-69

Cable TV Channels

2-13

Midband: A – 1

Superband: J – W

Hyperband: A-5 – A-1

Special Channel: 5A

Ultraband: 37 – 94, 100 – 125

NOTE: Designs and specifications are subject to change without notice.

Image 45

Philips SVZ142 owner manual Specifications

Contents

Video Cassette Recorder For Customer Use Warranty VerificationFeatures Safety PrecautionsIntroduction Table of Contents Putting Batteries in the Remote Control Before Using Your VCRUsing the Remote Control VCR maintenanceDisconnect the antenna or cable from your TV Hookups Without a Cable Box/Direct Broadcast SystemHookups Without a Cable Box/Direct Broadcast System cont’d Hookups With a Cable Box Timer RecordingsRecording and Viewing a Scrambled or Unscrambled Channel Watching TV With the VCR OffHookups With a Cable Box cont’d Recording One Channel/Watching AnotherPlaying a Tape Hookups With a Stereo TV 2Turn on the TV Turning on Your VCRAutomatic Channel Setup Automatic Channel Setup cont’d Adding/Deleting ChannelsSelect ADD/DELETE CH. Then, press the F.FWD button Follow the steps below to set your VCR’s clock. Make sure Setting the ClockSetting the Clock cont’d Language Selection Press the Counter RESET/EXIT button to exitPress the Display button once Clock mode OFF mode Press the Display button once Count modeOn-Screen Status Displays Press the DisplayRemote Control Buttons Eject Button Counter RESET/EXIT ButtonTime Search Button Index Search ButtonVCR Display Panel Front Panel Rear Panel AC Power CordVideo OUT Jack Video in JackRead and follow the steps below to play a tape Playing1Turn on the TV Insert a tape RecordingOne-Touch Recording Starting an OTRStopping an OTR Program Number Once Daily →WEEKLY Timer RecordingRepeat the procedure in to set the recording’s end time Timer Recording cont’dPress the Counter RESET/EXIT button Timer recording. Details are on page eightCorrecting a Timer Recording Cancelling a Timer RecordingAuto Return Auto Satellite Link Using a Satellite Tuner Recording One Channel/Watching Another Press the VCR/TV button on the VCR remote control toTo return to the channel being recorded, use the TV Put the VCR in VCR position. The VCR/TV light will appearJack Rerecording Tape DuplicationRepeat Play Forward and Reverse Searching SP/LP/SLP Special Effects PlaybackSuper High Speed Searching LP/SLP Viewing a Still PictureRental Play Menu will disappear, and Rental on or RentalTo on or OFF Press the Play button to watch the tape Real-Time Counter MemoryIndex Search Time Search is not available during recording Time SearchTo resume normal tape playback, press the Play button Quick FindAutomatic Playback Features Helpful Hints Helpful Hints cont’d Cable Box/DBS Output Channel Channel 3 or GlossarySpecifications Video Cassette Recorder Limited WarrantyIndex Supplied Accessories