4Activate the SWS3435 function
1 Turn on the HDTV, video sources and HDMI switcher.
2 Press POWER/SELECT to select the video sources one by one. Ensure all video sources work properly.
Note
•• Repeat the above procedure if the power supply is interrupted.
For CEC compliant HDTV and video sources
•Ensure your HDTV and video sources are in standby mode.
•Ensure the CEC function of your HDTV and video sources are activated.
Tip
•• For more information, see the user manuals of your HDTV and video sources.
•One touch play function: Switch on your video source.
»» The HDMI switcher is on and switches to the correct input source.
»» The HDTV is on and switches to the corresponding input source.
•Automatic switching: Switch on a video source.
»» The HDMI switcher switches to the corresponding input source automatically.
»» Depending on different video sources, the previous selected source device changes to 
/
/standby mode.
•Standby mode: Switch off the HDTV.
»» The HDMI switcher and all video sources go into standby mode.
For non-CEC compliant HDTV and/or video sources
The one touch play feature, automatic switching and standby mode are inactivated because of the following reasons:
•If the HDTV is not CEC compliant while the video sources are CEC compliant, the HDTV does not respond to the CEC commands sent by the video sources.
•If the HDTV is CEC compliant while all the video sources are
•If the HDTV is CEC compliant while not all of the video sources are CEC compliant, the
Manual operation
You can manipulate the HDMI switcher manually if the HDTV and/or video sources are
•To switch off the HDMI switcher, press and hold POWER/SELECT.
•To switch on the HDMI switcher, press POWER/SELECT again.
•To switch between different input sources, press POWER/SELECT on the HDMI switcher.
»» The LED indicator corresponding to the channel lights up.
8EN
