Philips SWS3435S/27 Installation, Rear view, DC input jack Output jack Input jacks 1/2/3, Red

Rear view

1 DC input jack

2 Output jack

3 Input jacks 1/2/3

The SWS3435 is a 4-in-1 HDMI switcher which offers a single cable connection to your HDTV. You can connect up to four video sources

to the HDMI switcher at the same time. The HDMI switcher is compliant with your CEC-enabled video sources, such as the DVD recorder, satellite, blue-ray player and game console.

CEC (Consumer Electronics Control) is part of the HDMI standard. If CEC is available in the source and HDTV devices in your home setup, the devices are able to pass commands through the HDMI connection.

3 Installation

Connect the HDMI switcher to your HD devices and video sources

You can connect four video sources to the HDMI switcher at the same time, but you can only select one source each time.

1 Connect the HDMI cables of the video sources to the input jacks (1/2/3/4) of the HDMI switcher.

2 Connect the HDMI cable of your HDTV to the output jack of the HDMI switcher.

3 Connect one end of the power adapter to the DC input jack of the HDMI switcher and the other end to a power socket. When there is a good power supply, the indicators are always on. »» The power LED indicator lights up in

red.

»» The input 1 indicator lights up in green. »» The CEC indicator lights up in blue.

Tip

•• You can also refer to the plug-and-play diagram at the back of the package.

English

EN 7