Programming / 67
There are only two reasons to modify the system LID.
•The site has multiple systems, and you want users to be able to move from system to system without changing slots on their portable telephones. All systems must be set to the same system LID.
•Two systems that are located near each other were accidentally assigned the same system LID. Users of one system can access the other system.
Note: This highly unlikely situation could occur, for example, in an office building occupied by multiple organizations.
Use ≠and CHANGE to modify the System LID.
Software keys (U.S. only)
The United States FCC has appointed UTAM Inc. as the body responsible for coordinating and verifying the installation or relocation of unlicensed, personal wireless communication devices. To comply with UTAM Inc., Norstar uses keys and credits to control user capacity and to ensure system location verification. These software keys and credits are required to activate Norstar Companion services on a new or upgraded system. The credits should have been purchased at the time the order was placed.
Base stations must be installed and powered first.
Base stations must be installed and powered before entering any UTAM Activation Keys. Verify that the base station LED status is solid red and green before entering any UTAM keys. Failure to follow the correct order of UTAM key entry may result in a disabled Norstar Companion system.
P0992639 01 | Modular ICS Companion Installer Guide |
