
76 / Registering individual portables
2.Make a call.
a.Press i. You hear dial tone, and the display shows LINK. If you do not hear dial tone, check that you have selected the correct system and that the associated desk telephone is idle or register the portable again.
b.Dial the number of a working telephone. The telephone must ring to confirm the registration.
3.Receive a call.
a.If the portable has the same extension number as a desk telephone, make sure the desk telephone is idle and Call Forward is not active.
b.On another working telephone, dial the telephone number of the registered portable. The portable must ring to confirm the registration.
If you do not hear dial tone, or if the portable does not ring, refer to Troubleshooting. If you continue to experience difficulty registering the portable, contact your distributor.
Deregistering the C3060
You can deregister the C3060 two ways:
•from the portable
•from the Administration Terminal
If you are in radio range of the system deregistering the C3060 from the portable clears registration information stored in the portable and the system. For example, you may want to deregister the portable before you assign it to another DN on the same system.
Deregistering the C3060 from the Administration Terminal does not clear registration data from the portable. Use this method if the portable were lost or stolen or if you want to assign it to another system.
Modular ICS Companion Installer Guide | P0992639 01 |