Nortel Networks P0992639 01 manual Registering the C3020 Canada only, To register the C3020

86 / Registering individual portables

3.Press Òor L.

4.Press °•ªª.

5.Enter the five-digit ID code for the base station radio you want to measure. The portable displays this ID followed by the signal strength, for example 03142 - 54. Hand-off does not occur as you move between the cell boundaries. The link drops when you move out of range.

In this example, the module is 03, the port is 14, and the radio is 2. The signal strength measured by the base station is -54dBm.

6.To end the connection, press ´, e or close the flap.

Registering the C3020 (Canada only)

The following section describes the procedures involved in registering Companion C3020 portable telephones. To register each portable with the Norstar system, you must do two things:

•Register the portables by entering the Registration password on each one.

•Verify that the portable functions properly.

To register the C3020

1.On the Administration set, turn on registration in a general programming session.

2.On the portable, press s, then press m.

3.Press o.

4.Check the portable display.

If the portable has space for another system, the display shows Office n: Free.

Modular ICS Companion Installer Guide P0992639 01