Nortel Networks P0992639 01 manual Alarm Definition Re-eval occurred?

Programming / 63

After installing Norstar Companion components and obtaining the proper number of UTAM activation keys (see Software keys (U.S. only) on page 67), you need to verify that wireless re-evaluation has occurred. Alarm code messages can be used to indicate whether or not wireless re-evaluation has occurred:

Alarm	Definition	Re-eval occurred?
21	Re-eval in progress	No
22	Re-eval complete	Yes
23	Cell configured.	No
	Failed to come on line

Please refer to the Alarm and Event Code Manual for more information on alarm messages and the actions that should be taken to resolve any problems.

Re-evaluation Status

Press ≠to see the Re-evaluation status. If the display reads required, you can carry out the re-evaluation by pressing CONTINUE and following the prompts.

Re-evaluation Schedule

This setting allows you to select whether to proceed or to schedule the next Re-evaluation.

The default setting is Not scheduled. If you want to schedule a re-evaluation, press CHANGE. You can begin re-evaluation by pressing NOW, or schedule re-evaluation by pressing LATER.

You are prompted to enter a time and date.

Radios

Radio programming settings apply to base stations.

P0992639 01 Modular ICS Companion Installer Guide