Programming
Programming is performed by the installer or the customer service representative. The interface allows you to change settings for the entire Norstar system, plus settings for individual telephones and external lines. Most of the settings can also be programmed by a system coordinator who has a SysCoord+ password. This password is distributed only by the installer to avoid system complications.
Programming affects system operation.
Only a qualified installer or customer service representative should perform startup, installation and maintenance programming. Some of the settings affect the correct operation of the system.
Installation programming
Before you attempt to program the Companion sets, familiarize yourself with the Programming section of the Modular ICS Installer Guide. The section explains the four types of passwords and the menus each password can access.Not that that the Companion prompts are only visible through the
For information about Companion set programming using the System Coordinator and Basic passwords, refer to the Modular ICS Companion System Coordinator Guide.
P0992639 01 | Modular ICS Companion Installer Guide |
